8613833209611
ldsyeric@ldsy.cn
akTwi

Wo professional PP Sheet Supplier .

 

 

Baoding Lida Plastic Industry Co., Ltd., a wɔde sii hɔ wɔ afe 1997 mu no yɛ amanaman ntam plastic nneɛma kuw adwumakuw a ɛka R&D, nneɛma a wɔyɛ, nea wɔtɔn, nea wɔde yɛ adwuma, ne nneɛma a wɔde ba/wɔde kɔ amannɔne ho bom. Ɛyɛ adwumakuw titiriw bi a wɔyɛ plastic nsu afiri ne ntama.

 
  • PP Whtie Kɔla Nkrataa
    PP Whtie Kɔla Nkrataa
    PP whtie Sheet yɛ board bi a wɔde polypropylene resin a ɛho tew na ɛyɛ denam akwan te sɛ extrusion so. Rigid PP Sheet nni kɔla masterbatches, pigments, anaa dyes biara, enti ɛma semi-transparent anaa nufusu fitaa hwɛbea a ɛwɔ raw
    Kenkan pii
  • PP Kɔla Nkrataa
    PP Kɔla Nkrataa
    PP kɔla board, a wonim no yiye sɛ polypropylene kɔla board anaa PP plastic kɔla board, yɛ kɔla plastic krataa bi a wɔde polypropylene raw materials titiriw na ɛyɛ denam akwan horow te sɛ extrusion so. Wobetumi ate Polypropylene PP Colored
    Kenkan pii
  • PP Nkratafa a Wɔde Kɔla Akyerɛw
    PP Nkratafa a Wɔde Kɔla Akyerɛw
    Embossed Polypropylene Plate yɛ polypropylene krataa a ɛyɛ adwuma a ɛda adi sɛ ɛnyɛ-slip texture wɔ ne soro a wonya denam embossing kwan so. Ɛka mfasoɔ a ɛwɔ PP nneɛma so —ɛyɛ hare, ɛkyɛ, ne eco-adamfofa —ne hemp-te sɛ textured surface a
    Kenkan pii
  • PP Kɔla Nkrataa
    PP Kɔla Nkrataa
    PP kɔla board, a wonim no yiye sɛ polypropylene kɔla board anaa PP plastic kɔla board, yɛ kɔla plastic krataa bi a wɔde polypropylene raw materials titiriw na ɛyɛ denam akwan horow te sɛ extrusion so. Wobetumi ate Polypropylene PP Colored
    Kenkan pii
  • PP Nkratafa a wɔakyerɛw so
    PP Nkratafa a wɔakyerɛw so
    Embossed Polypropylene Plate yɛ polypropylene krataa a ɛyɛ adwuma a ɛda adi sɛ ɛnyɛ-slip texture wɔ ne soro a wonya denam embossing kwan so. Ɛka mfasoɔ a ɛwɔ PP nneɛma so —ɛyɛ hare, ɛkyɛ, ne eco-adamfofa —ne hemp-te sɛ textured surface a
    Kenkan pii
  • PP Whtite Nkratafa a Wɔde Di Dwuma
    PP Whtite Nkratafa a Wɔde Di Dwuma
    PP Natural Sheet yɛ board bi a wɔde polypropylene resin a ɛho tew na ɛyɛ denam akwan te sɛ extrusion so. Rigid PP Natural Sheet nni kɔla masterbatches, pigments, anaa dyes biara, enti ɛma semi-transparent anaa nufusu fitaa hwɛbea a ɛwɔ raw
    Kenkan pii
  • PP Nkratafa a Wɔde Kɔla Ayɛ
    PP Nkratafa a Wɔde Kɔla Ayɛ
    PP kɔla board, a wonim no yiye sɛ polypropylene kɔla board anaa PP plastic kɔla board, yɛ kɔla plastic krataa bi a wɔde polypropylene raw materials titiriw na ɛyɛ denam akwan horow te sɛ extrusion so. Wobetumi ate Polypropylene PP Colored
    Kenkan pii
  • PP Abɔde mu Nkratafa Fitaa
    PP Abɔde mu Nkratafa Fitaa
    PP Natural Sheet yɛ board bi a wɔde polypropylene resin a ɛho tew na ɛyɛ denam akwan te sɛ extrusion so. Rigid PP Natural Sheet nni kɔla masterbatches, pigments, anaa dyes biara, enti ɛma semi-transparent anaa nufusu fitaa hwɛbea a ɛwɔ raw
    Kenkan pii
  • Ogya a Ɛmma Ogya Ntumi Nhyew PP Krataa
    Ogya a Ɛmma Ogya Ntumi Nhyew PP Krataa
    Polypropylene (PP) yɛ ade a wɔde yɛ thermoplastic a oxygen index yɛ 17%, na ɛma ɛyɛ polymer a ogya tumi hyew kɛse a ogya ntumi nkɔ mu yiye. Saa su yi ma asiane a ɛwɔ hɔ sɛ ogya bɛtɔ no yɛ kɛse. Sɛnea ɛbɛyɛ a wobedi PP a ɛyɛ hyew a efi
    Kenkan pii
  • Embossed PP kɔla a ɛyɛ den .
    Embossed PP kɔla a ɛyɛ den .
    Nkyekyɛmu :pp nkratafa pPH sheetspps nkratafa pp fiber masked sheetpp sandwich nkratafa .
    Kenkan pii
  • PP whtie Nkratafa .
    PP whtie Nkratafa .
    PP WHTIE krataa no yɛ board bi a wɔde polypropylene resin a ɛho tew a ɛnam akwan te sɛ extrusion so na ɛyɛ. PP krataa a ɛyɛ den no nni kɔla masterbatches, pigments, anaa dyes, na ɛnam so kura semi-aduru fitaa a ɛyɛ mmerɛw anaa nufusu a ɛwɔ
    Kenkan pii
  • FM PP krataa a ɛwɔ ɛlɛtrɔnik ne anyinam ahoɔden mu .
    FM PP krataa a ɛwɔ ɛlɛtrɔnik ne anyinam ahoɔden mu .
    PP Flame-Retardant krataa yɛ plastic board bi a wɔde polypropylene (PP) yɛ sɛ nnyinasoɔ adeɛ, a wɔayɛ no denam ogya a ɛgyae a wɔde ka ho anaa nsakraeɛ akwan foforɔ a wɔde bɛnya ogyaframa-retardant dwumadie so. Saa adeyɛ yi de ogya a ɛkyɛn
    Kenkan pii
Deɛ ɛdi kan 12 Twa toɔ
 
Dɛn nti na ɛsɛ sɛ wɔpaw yɛn .

 

Yɛn adansedi krataa .
ISO9001; ISO14001;ISO45001;Chinafo nkrataa 10 a ɛwɔ soro; Chinafo afiri a wɔde fa nsu mu a ɛwɔ soro 10; Nnwumayɛbea no mudi mu kura ho nhyehyɛe ho adansedi krataa; akyi-adetɔn ho adansedi krataa; Hebei Mantam Nnwumayɛbea Nhwehwɛmu ne Nkɔso Asoɛe no adansedi krataa; Amanaman ntam gyinapɛn ahorow a wodi so ho adansedi krataa; Adansedi krataa a ɛkyerɛ sɛ ɛkorɔn-Tech Enterprise .

 

Nneɛma a wɔyɛ ho gua .
Wɔde yɛn nneɛma no akɔ aman bɛboro 30 so, te sɛ Amerika, England, Canada, Korea, Australia, Singapore, Malaysia, Thailand ne nea ɛkeka ho.

 

Yɛn som adwuma no .
Baoding Lida Plastic Industry Co., Ltd. ahyɛ bɔ sɛ ɛde nea ɛboro nneɛma a ɛyɛ papa ara kwa bɛma yɛn adetɔfo, ne sɛnea yɛde bo ahorow a ɛsom bo-a wɔde aka ho a mfiridwuma ho mmoa ne mmuae a ɛyɛ ne bere mu de ma yɛn adetɔfo da biara da ahiade ahorow no bɛma. Yɛne wo reyɛ adwuma da biara da sɛ ɛnyɛ sɛ yɛbɛtumi adi w’anidasoɔ a ɛkorɔn no ho dwuma nko, na mmom ɛbɛboa wo ama woafa gua foforɔ so akɔ so.

 

FM PP Sheet

 

PP krataa .

Polypropylene krataa, anaa PP krataa yɛ ade a ɛyɛ tratraa, emu yɛ hare, na ɛyɛ den a wɔde polypropylene ayɛ—a ɛyɛ ɔhyew a wɔde di dwuma kɛse a wonim no sɛ ɛyɛ den yiye, ɛko tia nnuru, na ɛyɛ nea wotumi de di dwuma wɔ mmeae ahorow. Wɔde extrusion anaa molding akwan na ɛyɛ PP nkratafa, na ɛma wotumi yɛ no wɔ ne kɛse, ne kɛse, ne nea wɔde wie mu de di nnwuma ahorow ahiade pɔtee ho dwuma.

 

Kɛseɛ:

 

Nneɛma a ɛyɛ den: .2–40 mm .

1

>>

Ntrɛmu:1000–2000 mm .

2

>>

Tenten:Ne tenten biara.

3

>>

Ahosuo:White (a wɔsan frɛ no abɔde), microcomputer grey (a wɔsan frɛ no asase so fitaa, beige grey, german a ɛyɛ fitaa) .

4

>>

Aba:Grade A .

5

>>

density (akwansin pɔtee bi): .0.915 g/cm3 na ɛwɔ hɔ.

6

 

 

Mfiridwuma ho nsɛm krataa a ɛwɔ PPH rigid krataa so .

 

 

Adeɛ a wɔde sɔ hwɛ .

Standard ahwehwɛde .

Nsɔhwɛ mu aba .

1

Abɔnten so .

efĩ ne macula ahorow .

Wɔ soro .

Ntrɛwmu biara nni hɔ a ɛboro 2 mm a efĩ ne macula ahorow ma ho kwan. Wɔ 0.5m×0.5m mu no, efĩ ne maculas nsen anum sɛ ne ntwemu no sua sen milimita 1.

Di so

Ripples a ɛwɔ soro .

Wɔmma kwan mma asorɔkye a ɛda adi pefee no ntra hɔ .

Di so

sanku a ɛwɔ soro .

Wɔmma ho kwan .

Di so

Concaves ne convexes a ɛwɔ soro no .

wɔamma kwan ma wɔantumi ankɔ concaves ne convexes a anibere wom no mu; Ɛnyɛ nea ɛboro2 4mm×4mm concaves ne convexes a ɛwɔ hɔ wɔ mita ahinanan biako mu, na wɔkyekyɛ net form .

Di so

Nneɛma a ɛho agu fĩ a ɛwɔ soro no .

Wɔmma ho kwan .

Di so

Nniso a ɛwɔ soro no so .

a wɔma ho kwan nsa a ɛyɛ mmerɛw no te nka sɛ scratched traces wɔ hɔ, nanso wɔmma kwan sɛ ɛbɛyɛ net form .

Di so

Chromatism .

Chromatism biara nni hɔ a wɔma ho kwan wɔ batch koro no ara mu .

Di so

nsensanee a ɛwɔ soro .

Wɔmma kwan mma nsensanee a ɛda adi pefee no ntra hɔ .

Di so

2

Nneɛma a ɛyɛ den : g/cm .3

nea ennu anaasɛ ɛne 0.915 yɛ pɛ .

0.915

3

Mfiridwuma mu agyapade .

Tensile ahoɔden/ MPa a ɛboro anaasɛ ɛne 30.0 yɛ pɛ.

32.1

Notch Nkɛntɛnso Ahoɔden/ KJ/ M .2 Ɛboro so anaasɛ ɛne 10 yɛ pɛ .

14.7

Bending ahoɔden/ MPa kɛse sen anaasɛ ɛne no yɛ pɛ 35.0.

35.6

Ahoɔden a ɛwɔ nhyɛso mu/ MPa a ɛboro anaasɛ ɛne no yɛ pɛ 40.0.

40.2

4

Ɔhyew mu su ahorow .

Vicat softening temperature℃a ɛboro anaasɛ ɛne no yɛ pɛ 140 .

153

Size sesa rate bere a ɛyɛ hyew % .

ne tenten yɛ ±3.

+0.62

Wɔ trɛw mu ±3.

-0.89

5

corrode℃g/m .2

35%±1(v/v)HCL ±1.

-0.9385

30%±1(v/v) H2NTI4 ±1

+0.9213

40%±1(v/v) HNO .3 ±1

+0.9198

40%±1(v/v)NaOH ±1.

-0.7943

 

Mfaso a ɛwɔ PP nkrataa a wɔde di dwuma so .

Polypropylene (PP) nkrataa agye din wɔ nnwuma ahorow mu esiane wɔn agyapade soronko ne mfaso nti. Nea enti a ɛda nsow ni:

 

a ɛyɛ den na emu yɛ hare:PP nkrataa ma ahoɔden ne emu duru a ɛba fam a wɔaka abom yiye, na ɛma ɛfata ma nneɛma a wɔde di dwuma a ɛhwehwɛ nneɛma a ɛyɛ den nanso wotumi fa so te sɛ adansi ne kar afã horow.

 

Ɛka a wɔbɔ-etu mpɔn:Sɛ wɔde toto nneɛma afoforo a wɔde yɛ plastic ho a, polypropylene nkratafa no bo yɛ den yiye a ɛmma ɛnyɛ nea ɛfata. Eyi ma wɔyɛ nea wɔpɛ ma nneɛma a wɔde di dwuma kɛse te sɛ nea wɔde kyekyere nneɛma ho.

 

Wɔha-wɔha:PP nkrataa no ne dwumadie ahodoɔ pii hyia wɔ nnwuma ahodoɔ mu, a aduane a wɔde kyekyere nneɛma, nnuruyɛ mu nneɛma, ne mfiridwuma mu mfiri ka ho. Sɛnea wotumi yɛ nneɛma, weld, anaasɛ wotwitwa no ahorow ahorow no ma wotumi yɛ nneɛma pii.

 

Eco{0}}adamfofa:Esiane sɛ polypropylene nkratafa no yɛ nea wotumi de di dwuma bio koraa nti, ɛne nneyɛe a ɛtra hɔ daa hyia. Wobetumi asan de adi dwuma wɔ kyinhyia pii mu a ɛrensɛe kɛse, na ɛtew nneɛma a wɔsɛe no ne nneɛma a atwa yɛn ho ahyia so. Bio nso, wɔn non{2}}awudisɛm no ma wɔyɛ ahobammɔ ma nneɛma a ɛyɛ mmerɛw te sɛ aduan a wɔkora so.

 

Nnuru ne ɔhyew a ɛko tia:PP nkrataa da acid, alkali, ne nnuru a wɔde yɛ nneɛma a ɛma ɛyɛ hyew a ɛyɛ den yiye adi, na ɛma ɛyɛ nea eye ma nnuru a ano yɛ den a atwa yɛn ho ahyia. Wobetumi nso anya adwene .

 

 

Popular Thickness options .

 

 

PP krataa no mu duru ka ne kateeyɛ, ne mu duru, ne sɛnea ɔde di dwuma no. Nneɛma a ɛyɛ den a wɔtaa yɛ no bi ni:

 

2 mm Polypropylene krataa:ma ahoɔden a ɛkɔ fam a ɛma ahoɔden tu mpɔn; Ɛfata ma nsɛnkyerɛnne, mpaapaemu, ne mfiridwuma mu nneɛma a ɛyɛ hare.

 
 

2.5 mm Polypropylene krataa:kakra a ɛyɛ den sen 2 mm, a ɛma ɛyɛ den sɛ ɛbɛtra hɔ akyɛ bere a ɛda so ara yɛ mmerɛw sɛ wobedi ho dwuma; Ɛyɛ papa ma ahobammɔ nkataso ne fabrication nnwuma.

 
 

3 mm Polypropylene krataa:Ɛma ɛkari pɛ yiye wɔ sɛnea wotumi yɛ nsakrae ne sɛnea ɛyɛ katee no ntam; Wɔtaa de di dwuma ma mfiridwuma panels, packaging, ne light-Adwumayɛ ho nhyehyɛe.

 
 

4 mm Polypropylene krataa:a ɛyɛ den na ɛyɛ den; Ɛfata ma medium-Adwumayɛ ho banbɔ panels, partitions, ne abɔnten signage.

 
 

5 mm Polypropylene krataa:Ɛma nkɛntɛnso a ɛkorɔn a ɛko tia ne kateeyɛ; Wɔtaa de yɛ mfiridwuma mu nnua, mfiri a wɔde hwɛ nneɛma so, ne mpaapaemu.

 
 

6 mm Polypropylene krataa no:Extra-Ahoɔden a wɔpaw ma application ahorow a ɛyɛ den; Ɛyɛ pɛpɛɛpɛ ma mpaapaemu a ɛtra hɔ kyɛ, adansi ho ntama, ne akwanside ahorow a ɛbɔ ho ban.

 
 

8 mm Polypropylene krataa no:Thick na rigid, a ɛfata ma heavy-DUTY applications a mfiridwuma mu nhyɛso yɛ kɛse.

 
 

10 mm Polypropylene krataa:Ɛyɛ den yiye na ɛyɛ katee; Ideal ma High-Ahoɔden a ɛwɔ mfiridwuma ne adansi mu.

 

 

Sɛnea wobɛpaw PP krataa a ɛfata .

Sɛ worepaw PP krataa a, susuw nneɛma a edidi so yi ho:

Ahwehwɛde a Wɔde Di Dwuma:

Hwɛ sɛ wɔde krataa no bedi dwuma wɔ dan mu anaa abɔnten, de ayɛ nnuru, anaasɛ wɔde ayɛ mfiri adesoa-bearing atirimpɔw ahorow.

01

Nneɛma a ɛyɛ den: .

Paw nea ɛfata a ɛyɛ den na ama ahoɔden, sɛnea ɛyɛ mmerɛw, ne ɛka a wɔbɔ no kari pɛ. Sɛ nhwɛso no, 0.5 mm nkratafa yɛ nea eye ma liners, bere a 10 mm nkratafa no fata ma soro-ahoɔden applications.

02

Korɔ:

Paw ntam a ɛyɛ den, corrugated, anaa twin fasu a egyina structure ahiade so.

03

Ahosuo:

Susuw aesthetics ne branding ahiade ho hwɛ. Bere a fitaa yɛ gyinapɛn no, nkratafa a ɛwɔ kɔla ahorow no ma wotumi yɛ nsakrae foforo wɔ nhyehyɛe ho.

04

Bɔgyete:

Factor wɔ PP krataa bo mu sɛnea ne kɛse, ne su, ne dodow a wɔhwehwɛ.

05

 

 

Nneɛma a wɔde di dwuma ho nsɛm a wɔtaa yɛ .

PP krataa a wɔtaa de di dwuma:

  • Nnuru a wɔde gu mu, tank linings .
  • Kuadwuma mu nnuadewa trays, greenhouse panels .
  • Aduruyɛ mu nneɛma a wɔde kyekyere nneɛma ho, nnuru a wɔde yɛ nnuru .
  • Nneɛma a wɔde yɛ nsu fĩ ho adwuma no afã horow .
  • Aduan-grade processing board ahorow .
FM PP Sheet

 

 

FAQ .

 

 

Asɛmmisa: Bere bɛn na wode bɛkɔ akɔma wo?

A: Sɛ nneɛma no wɔ stock mu a, ɛtaa gye nnafua 3-7, anaasɛ egyina dodow a wo order no so.

Asɛmmisa: Mɛyɛ dɛn anya samples?

A: Mpɛn pii no, nhwɛsode ahorow no yɛ nea wontua hwee, nanso mframa a wɔde ma ntɛmntɛm no ho ka taa yɛ nea adetɔfo no na wotua. Sɛ worekra biribi a, yɛsrɛ wo nso ka wo akontaabu ho nsɛm kyerɛ yɛn. Edin a edi mũ, address, postal code, obi a ɔne no di nkitaho, ne telefon nɔma a ɛwɔ adwumakuw bi a wɔde nneɛma mena te sɛ DHL anaa FedEx.

Q: So metumi anya wo company no product price list?

A: Nokwarem no, yɛsrɛ wo ka nsɛm a ɛkɔ akyiri a wopɛ, te sɛ ne kɛse, ne kɔla, ne mu duru/m2, nneɛma a wɔde yɛ nneɛma a wɔde yɛ nneɛma, nea wɔde di dwuma awiei, ne nea ɛkeka ho kyerɛ yɛn Yɛde asɛm a edi kan a wɔafa aka no bɛma wo akyiri yi.

Asɛmmisa: Katua ho nsɛm: Yɛbɛyɛ dɛn ayɛ nhyehyɛe sɛ yebetua sika?

A: Wire Transfer/PayPal/Western Union: Wire Transfer (Wire Transfer), 30% a Wɔtua, Balance ansa na wɔde Bill of Lading amena anaasɛ wɔde bi bɛmena.

Yɛyɛ yie-a wonim no sɛ PP krataa a wɔyɛ ne wɔn a wɔde nneɛma ma wɔ China no mu baako. Yɛsrɛ sɛ, ntwentwɛn wo nan ase sɛ wobɛma wholesale high quality PP sheet made in China ha fi yɛn factory. Wo ne yɛn nkasa na woanya nsɛm pii.

Nneɛma a agye din .
Send Inquiry .
Baoding Lida Plastic Nnwumayɛbea no mu biako, Ltd .
Mfiridwuma sɛ ne adwumayɛ titiriw, adwumakuw no ahyɛ ase-End Product Series a ɛyɛ adwuma wɔ amanaman ntam nkɔso levels.
Yɛne yɛn nkasa .